Lihlahisoa
Acrylonitrile bakeng sa Acrylonitrile Butadiene Rubber
Acrylonitrile bakeng sa Acrylonitrile Butadiene Rubber,
Acrylonitrile Bakeng sa NBR, Acrylonitrile Bakeng sa Rabara ea Nitrile,
NBR, Buna-N, le nitrile kaofela li emela elastomer e tšoanang e thehiloeng ho butadiene le acrylonitrile copolymer.Nitrile ka tlhaho e hanana le maro a haeteroliki, oli e tlotsang, maro a phetiso le lihlahisoa tse ling tse se nang polar ka lebaka la sebopeho sa polar sa elastomer ena.Li-nitriles li boetse li hanana le tikoloho ea moea le metsi.
Likarolo tsa Sehlahisoa
| Lebitso la Sehlahiswa | Acrylonitrile |
| Lebitso le Leng | 2-Propenenitrile, Acrylonitrile |
| Foromo ea limolek'hule | C3H3N |
| Nomoro ea CAS | 107-13-1 |
| Nomoro ea EINECS | 203-466-5 |
| UN NO | 1093 |
| Hs Khoutu | 292610000 |
| Boima ba molek'hule | 53.1 g/mol |
| Botenya | 0.81 g/cm3 ho 25℃ |
| Ntho e belang | 77.3 ℃ |
| Sebaka se qhibilihang | -82 ℃ |
| Khatello ea mouoane | 100 torr ho 23 ℃ |
| Solubility Ho qhibiliha ka har'a isopropanol, ethanol, ether, acetone, le benzene Conversion factor | 1 ppm = 2.17 mg/m3 ho 25 ℃ |
| Bohloeki | 99.5% |
| Ponahalo | Seela se se nang mmala se bonaletsang |
| Kopo | E sebelisoa ha ho etsoa polyacrylonitrile, rabara ea nitrile, dae, li-resin tsa maiketsetso. |
Setifikeiti sa Tlhahlobo
| Teko | Ntho | Sephetho se Tloaelehileng |
| Ponahalo | Seela se se nang mmala se bonaletsang | |
| Mmala APHA Pt-Co :≤ | 5 | 5 |
| acidity (acetic acid) mg/kg ≤ | 20 | 5 |
| PH(5% tharollo e nang le metsi) | 6.0-8.0 | 6.8 |
| Boleng ba Titration (5% tharollo ea metsi) ≤ | 2 | 0.1 |
| Metsi | 0.2-0.45 | 0.37 |
| Boleng ba aldehydes (acetaldehyde) (mg/kg) ≤ | 30 | 1 |
| Boleng ba Cyanogens (HCN) ≤ | 5 | 2 |
| Peroxide (hydrogen peroxide) (mg/kg) ≤ | 0.2 | 0.16 |
| Fe (mg/kg) ≤ | 0.1 | 0.02 |
| Ho (mg/kg) ≤ | 0.1 | 0.01 |
| Acrolein (mg/kg) ≤ | 10 | 2 |
| Acetone e na le phello e mpe | 80 | 8 |
| Acetonitrile (mg/kg) ≤ | 150 | 5 |
| Propionitrile (mg/kg) ≤ | 100 | 2 |
| Oxazole (mg/kg) ≤ | 200 | 7 |
| Methylacrylonitrile (mg/kg) ≤ | 300 | 62 |
| Litaba tsa Acrylonitrile (mg/kg) ≥ | 99.5 | 99.7 |
| Mefuta e belang (ho 0.10133MPa) ℃ | 74.5-79.0 | 75.8-77.1 |
| Polymerization inhibitor (mg/kg) | 35-45 | 38 |
| Qetello | Liphetho li lumellana le boemo ba khoebo | |
Sephutheloana le Phano
Sesebelisoa sa Sehlahisoa
Acrylonitrile e hlahisoa khoebong ka propylene ammoxidation, eo ho eona propylene, ammonia, le moea li tšoaroang ke catalyst betheng e nang le metsi.Acrylonitrile e sebelisoa haholo-holo e le co-monomer ha ho etsoa li-acrylic le modacrylic fibers.Litšebeliso li kenyelletsa tlhahiso ea li-plastiki, li-coatings, li-elastomer tsa nitrile, li-resin tse thibelang, le li-adhesives.Hape ke lik'hemik'hale tse lipakeng tsa motsoako oa li-antioxidants tse fapaneng, meriana, lidae le tse sebetsang ka holim'a metsi.
1. Acrylonitrile e entsoeng ka fiber polyacrylonitrile, e leng fiber ea acrylic.
2. Acrylonitrile le butadiene li ka etsoa copolymerized ho hlahisa rabara ea nitrile.
3. Acrylonitrile, butadiene, styrene copolymerized ho lokisetsa ABS resin.
4. Acrylonitrile hydrolysis e ka hlahisa acrylamide, acrylic acid le esters ea eona.
